Yeah, I also used to like AvE’s tool teardowns, I felt he did a good job explaining the little things you wouldn’t think about, where companies cut costs, and if those cost/perf tradeoffs were done in a smart way or if it would bite you.

Enter covid, and he’s ranting about US politics and trucker convoys. Unsubscribed and haven’t watched him since, tbh the channel was going downhill before then, but that was the straw that broke the camels back.

Sad to hear he kept up with the bad views, but not surprising.

He does little bursts of running with periods of walking in between, so I dont think it would work. Perhaps with other cats it would though

Take out any spinning rust and pack those in a foam HDD case. Number them as you pull them for easy reinstall.

Put a bit of plywood under the rack, ratchet strap it, and now you can put it on a dolly without the lip hitting the equipment as you try and lift it. For avoiding it falling off the dolly, use a 2nd ratchet strap and wrap it around the chassis / dolly.

Put a 2nd piece of plywood on top once its in the uhaul so you can load more boxes on top… Maybe even do that at first so the initial strap is securing it as well.

As for the bottom plywood, if you add some felt pads, then it will help you shimmy the chassis into / out of its position once its unloaded. I have my rack vhb taped to ply with felt under it and recommend it to people IRL a fair bit.

deleted by creator

oh thanks for the heads up!

Yeah, or even something in the middle where you still use a cheap microcontroller and the hall effect sensor to track distance without any treats. You would have to find a way to get the cat running in the first place though.

It seems like people have better luck getting the larger semi-domesticated savannah cats / similar to use the wheel than domestic house cats without training

I wanted to make a human sized wheel to bring to opensauce that dispenses candy thats the equivalent to the calories you burned, or possibly had motors acting as a generator that powered up a power bank for people to charge their phones from!

Thanks for the feedback though, and glad you liked it :)

smb share if its desktop to desktop. If its from phone to PC, I throw it on nextcloud on the phone, then grab it from the web ui on pc.

Smb is the way to go if you have identity set up, since your PC auth will carry over for the connection to the smb share. Nextcloud will be less typing if not since you can just have persistent auth on the app / web.

Its just a test to dial your printer in. I shimmed my bed with 0.1mm washers. I haven’t done a full square of plastic, but I printed my first layer / z-offset print of choice in all 4 corners and center in order to verify the bed level results in octoprint were accurate.

Before hand 70% of my bed printed perfect, but one spot was a little lower, and the mesh bed leveling wasn’t accounting enough for it. Parts printed on textured sheets would not pick up the texture as well in that one spot. I like the textured look for top surfaces of control panels and such, so having an area on the bed that wouldn’t apply the texture was a bit annoying.

Tests like what you are talking about is an extreme way to verify that everything is square, or at least well accounted for in the firmware.

Also, since this wasn’t something achievable out of the box until recently, printer manufacturers are showing it off as a point of pride / as a sales tactic.

Yeahhhhh, they have a sale going on right now, but its still like 1800. I really do think that its more of a business target with that price though. While the original stick einstar won’t pick up on super fine details, a scan from it + some caliper measurements has done me pretty well with hobby projects. The price point is definitely more reasonable on that for hobbiest makers

Woosh :p

Yep, to add on as well as summarized this… Linux has historically had a design methodology of “everything is a file”. If your not familear with the implications of this, it means your command line tools just kind of work with most things, and everything is easy to find.

For instance, there’s no “registry / regedit” on Linux… There’s just a folder with a config file that the application stores settings in. There’s no control panel application to modify your network settings… Just a text file on your OS. Your system logs and startup tasks were also (you guessed it) sinole filea on the system. Sure there might be GUI apps to make these things easier for users, but under the hood it reads and writes a file.

This idea goes further than you might assume. Your hard drive is a file on the file system (a special file called a block device). You can do something like “mount /dev/sda1 /home/myuser/some_folder” to “attach” the drive to a folder on the system, but that special block device (dev/sda1 in this case) can be read and written to byte by byte if you want with low level tools like dd.

Even an audio card output can show as a file in dev (this is less the case now with pipewire and pulse), but you used to be able to just echo a raw audio file (like a wav file) and redirect the output to your audio device “file” and it would play out your speaker.

Systemd flipped this all around, and now instead of just changing files, you have to use applications to specify changes to your system. Want to stop something from starting? Well, it used to be that you just move it out of the init directory, but now you have to know to “systemctl disable something.service”, or to view logs " journalctl -idk something.service" I dont even remember the flags for specifying a service, so I have to look it up, where it used to just be looking at a file (and maybe use grep to search for something specific)

I run freeipa internally, which handles all internal https certs (as well as nice things like handling non sudo auth so I can just ssh to machines from an already authed machine without a PW prompt, and doing ldaps for internal things that support it)

For external web, I have a single box running nginx as a reverse proxy thats web exposed. That nginx box has letsencrypt certs for the public web stuff. The nginx rp has the internal CA on it and will validate the internal https certs (no mullet SSL here!)

I also do different domains for internal vs external, but thats not a requirement for a setup like this

A prion is just a misfolded protine that has some adverse behavior that your body can’t detect (there’s a mechanism that if your body identifies a malformed protine, it will terminate the cell making it). Anyway, prions live in this small region in a Venn diagram whereits can’t be detected, but can still replicate and cause harm.

We mostly think of prion diseases (like mad cow) affecting the brain, but I dont think prions are isolated to the brain… Prion deseases happen to involve the brain a lot because a misbehaving protine in your brain will have a lot more apparent effects

Rhasspy. Idk if rhasspy3 is out fully, but I would wait for that and then set it up. (I have began to see the home assistant side being released - its supposed to tie in a lot better than rhasspy2, and even brought the dev on to the HA project)

Significantly better code gen, but not to the point where it can make an application on its own. I tried using it for an embedded esp32 based project for fun, and while it could create mqtt support, the code for setting up WiFi / a small web backend / some HTML for a front end… It struggled with the application logic. Either way, it got about 70% of the way there

Highly recommend a soda stream, or soda stream alternative. My go to is 4 or 5 drops of lime juice in a glass, then the carbonated water. Tastes identical to the canned stuff, but way cheaper (and maybe less preservatives? Idk if the canned water has anything besides fruit juice and water)

I also occasionally like root beer if I’m eating something junky like a pizza slice or burger. I bought a bag in a box of syrup from the small root beer brand I enjoy, and can make my own for a few cents instead of a few bucks per bottle. Plus, I can control the concentration depending on how sweet my sweet tooth is feeling that day

The best part now though… If something breaks and you need to do some disassembly to fix it, you have the confidence to do it. Same goes for making any mods

Batman? I believe it was a mesh protocol

But… He linked a Firefox extension… Which is keeping support for v2 api calls as well