If they run away you can find them. If they get close to something dangerous like a big road for example you get alerted and can go get them so they don’t get run over.

It can’t really be enforced and they say so in the proposal. It is something “good actors” should abide by just like robots.txt. Anyone can just ignore it if they want.

That doesn’t apply here. Bluesky does not use activitypub

Average arch user

So hyped for this

Same energy as chr(sum(range(ord(min(str(not())))))))

The mouse stays on the internal display.

Yes

[  930.571238] usb 3-4: new high-speed USB device number 21 using xhci_hcd
[  930.706640] usb 3-4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.74
[  930.706652] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  930.706655] usb 3-4: Product: USB2.0 Hub             
[  930.706658] usb 3-4: Manufacturer: VIA Labs, Inc.         
[  930.706661] usb 3-4: SerialNumber: 000000000
[  930.709490] hub 3-4:1.0: USB hub found
[  930.709697] hub 3-4:1.0: 5 ports detected
[  931.438189] usb 3-4.4: new high-speed USB device number 22 using xhci_hcd
[  931.583868] usb 3-4.4: New USB device found, idVendor=2109, idProduct=2211, bcdDevice= 5.84
[  931.583877] usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  931.583879] usb 3-4.4: Product: USB2.0 Hub             
[  931.583881] usb 3-4.4: Manufacturer: VIA Labs, Inc.         
[  931.585386] hub 3-4.4:1.0: USB hub found
[  931.585580] hub 3-4.4:1.0: 4 ports detected
[  932.100980] usb 3-4.5: new high-speed USB device number 23 using xhci_hcd
[  932.183614] usb 3-4.5: New USB device found, idVendor=2109, idProduct=8884, bcdDevice= 0.01
[  932.183624] usb 3-4.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  932.183626] usb 3-4.5: Product: USB Billboard Device   
[  932.183629] usb 3-4.5: Manufacturer: VIA Labs, Inc.         
[  932.183630] usb 3-4.5: SerialNumber: 0000000000000001
[  932.634461] usb 3-4.4.1: new full-speed USB device number 24 using xhci_hcd
[  932.830091] usb 3-4.4.1: New USB device found, idVendor=1038, idProduct=12ad, bcdDevice= 1.19
[  932.830109] usb 3-4.4.1: New USB device strings: Mfr=4, Product=5, SerialNumber=0
[  932.830115] usb 3-4.4.1: Product: SteelSeries Arctis 7
[  932.830120] usb 3-4.4.1: Manufacturer: SteelSeries 
[  933.230162] input: SteelSeries  SteelSeries Arctis 7 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4.1/3-4.4.1:1.5/0003:1038:12AD.0004/input/input17
[  933.281660] input: SteelSeries  SteelSeries Arctis 7 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4.1/3-4.4.1:1.5/0003:1038:12AD.0004/input/input19
[  933.282589] hid-generic 0003:1038:12AD.0004: input,hiddev96,hidraw1: USB HID v1.11 Device [SteelSeries  SteelSeries Arctis 7] on usb-0000:00:14.0-4.4.1/input5
[  933.411058] usb 3-4.4.2: new full-speed USB device number 25 using xhci_hcd
[  933.545758] usb 3-4.4.2: New USB device found, idVendor=0cf2, idProduct=b201, bcdDevice= 1.00
[  933.545764] usb 3-4.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  933.545766] usb 3-4.4.2: Product: 6K7732
[  933.545767] usb 3-4.4.2: Manufacturer: ENE
[  933.545768] usb 3-4.4.2: SerialNumber: 6243168002
[  933.551282] hid-generic 0003:0CF2:B201.0005: hiddev97,hidraw2: USB HID v1.11 Device [ENE 6K7732] on usb-0000:00:14.0-4.4.2/input1

This laptop has no dedicated gpu

Exactly. No I can’t move my mouse to the external monitor.

No I don’t have that installed. Isn’t DisplayLink something completely different?

Rebooting while connected sorta worked, but not really. When I logged in the laptop monitor went black and the external monitor was black with a white underscore at the top left as if a terminal was open. So that’s something I guess but I could not use my computer at all in this state.

Yes those are both installed

Right sorry forgot to mention that. The laptop is an Asus Vivobook S14 K3402Z (not the OLED one in case that matters). The monitor is a Philips Evnia 49M2C8900

Can someone explain? What is he doing in the last panel?

Nothing I can find. The latest release has a “breaking changes” section but that is nothing unusual. All software has breaking changes from time to time and should be addressed by your distro maintainers.

He must have known he would get caught right? Why else keep a written note on him? He must have intended for it to be found and mentioned in the news to further bring attention to the broken healthcare system

Except that one guy

LLMs are not different from any other type of software. Is there a privacy policy you can refer to? Can you monitor the network to see of it is trying to communicate with anything? If you want to be sure, just block internet access. This seems to be open-source so you could also just search for the phone-home code and remove it if it exists.

Was the video not about why he is not worried about the election?