atomic peach

If you’re up for making it a hobby and you like tinkering, have you thought of building a Voron? After using a few off-the-shelf units, I’ve come to appreciate using an open source project because upgrading components is so easy and second nature. You can incrementally upgrade specific aspects when your wallet and desires dictate it.

I think it’s important to remember that hobby level printers often require some amount of hobby level tinkering. There are many plug and print options available, and anything is extendable if you want to put the work into it (i.e. don’t fret if multicolor or multi-material are available yet or not, it’s always possible to mod a printer later). Any new cutting edge tech will likely have a bunch of bugs to work out, so expect some hurdles when adopting it.

If you want something to print here and there, it might be worthwhile to look at makerspaces near you. Let a shop handle the tinkering and machine upkeep and yet have something ready when you need it. Makerspaces often have a ton of additional resources so you aren’t stuck to just plastics.

But having worked with numerous off the shelf printers and finally building a Voron, I think it’s important for any printer owner to know how their machine is pieces together/how it works. Then, when things go wrong you’re able to fix them without much fuss. You don’t need to be an engineer to operate one, but it helps to know what’s holding each piece together and where the moving parts travel in order to quickly fix issues.

Lmao, right? Yet as an enjoyer of seeing road design and engineering, I’m unsure how they’d properly solve the issue without building four more bridges right there to weave the traffic more elegantly. Just too much stuff in one cramped location.

I’ll add a +1 to Battleblock Theater! Such a well done game that can be true co-op or “co-op with shenanigans” if that’s more your vibe. The story is entertaining and lighthearted and the levels introduce new mechanics throughout.

Be careful asking too many questions as most people won’t read and you’ll end up denying perfectly fine users. You’ll also end up reading essays for each application, which is tedious at best. A simple, “what about <this Lemmy instance> makes you want to join us instead of another instance?” would probably work perfectly fine.

It’s a very valid question and I think it comes down to an individual’s situation and circumstances. Not many can afford to actually leave or have family, friends, other ties to their home that they cannot emotionally afford to leave. Others struggle in how they can support efforts to fight for their rights or simply don’t have the physical or emotional reserves to make such a fight. I think the only truly ethically irresponsible answer would be to do the opposite that you are able and willing to do. I could never judge someone for leaving or for staying; it’s not really a mark of their character.

I’ve been using porkbun for a few years now and it’s been cheap, simple, and easy to use.

I’m not sure I understand the need for charging to play media on a private server when not on the local network. Why is this no longer going to be free? I’m glad I bought a lifetime pass many many years back but I definitely wouldn’t pay for Plex nowadays with alternatives being comparable. What a silly choice they made~

Fuck no! I always found it funny how communities find specific words offensive and look down upon people that use them. Context is important, of course, but the vast majority of cases I witness people swearing are non malicious in nature. (Don’t get me wrong, there are absolutely words/phrases I will never say; again, context is key here)

Coming up with alternative words for the same intent is super silly to me, too. The individual makes it very clear they are aware of the “rules” and are making an asserted attempt to sidestep them. Why bother with all that effort and not simply use the intended word instead?

Take a week and build a Voron. The kits are super easy to piece together and you end up with an insanely great, reliable printer for a fraction what it should cost. Yes, the build time and initial calibration might take a bit, but mine’s been without issue, printing 24h long prints perfectly for over a year now. You don’t need to settle for a mediocre built printer if you have the patience to piece together one. Not to mention, since you built the kit, you know how to troubleshoot any issues that pop up much faster than something you pulled out of a box and plugged into the wall.

You can self host with Vaultwarden! It’s just the server; you use the same Bitwarden clients.

Unless it’s a single origin bean, it’s probably a blend anyway. I just blend the leftovers with the new beans and call it a good cup. I’ll try to find a complimentary roast, though. e.g. mixing a light roast with a dark roast leads to an odd cup.

Acrylic paints are your friend here. They last a long while in their bottles and you can keep a palette for a few days when using a wet palette. start with just using a brush and jump up to an airbrush if you want to cover a bigger area or do fancy stuff (an air brush is far from required). As another commenter said, the minipainting community has a ton of resources, text and video tutorials, and willing to provide constructive feedback if you want it.

Just remember: thin your paints~

I’ve had a lot of success taking the rules that YNAB uses and applying to my own budgeting method. I recommend checking out Actual Budget if you’re capable of self-hosting and want a fancier software instead of a spreadsheet. The rules are key, though; pick a methodology/mindset you agree with and stick with it.

Jumblie #252 🟠🔵🟢🔴 5 guesses in 43s https://jumblie.com

I’ve only been playing the past handful of games but it’s a fun daily puzzle. I find it interesting that I either get sub 5 minute times or over 50 minute times. Lol

I usually just deep clean once a year and wash the floor multiple times over until it’s pretty clean. Then I let my robot vacuum/mop keep it mostly clean twice a week the rest of the year. The robovac helps enforce a cleaner lifestyle by ensuring things aren’t left out and about. The floors will never be perfectly clean though, just the nature of life~

As for everything else, I set reoccurring calendar tasks to space it out but I try to do one area per weekend. Keeps cleaning manageable but regular.

Since you mention wanting to filter really well, I would recommend you take a look at chemex. It’s a pour over type of brewer but their smaller model is for a single serving and will be more lenient with the pour method since the chemex filters are so dense. Other pour over brewers will require more of a setup to maintain consistency (but you can also tweak the brew to your exact liking in this regard!).

Water temp and grind size are somewhat critical for quality coffee but you don’t need it right off the bat of course. I would get a grinder before a kettle, tbh; fresh grounds make a bigger difference than a few degrees difference in water temp. Do work on “calibrating” your water temp in whatever method you use, though. If you microwave the water, figure out how long to let it cool before it reaches 200 or whichever temp you find brews best for your beans.

Search for local roasters and buy some beans from them. Keep searching until you find a brand you like. Grocery store beans are very mid. (There are many weekly “drop” style bean shippers that are pricey but let you discover online roasters that will ship you beans; it’s been invaluable for me to find really good roasts!)

As for cold brew, it’s a separate beast entirely and I wouldn’t explore it just yet. I used to make large batches for my nitro setup and did that in a bucket. Definitely super smooth but a bit more work. You can make smaller batches with a French press. I’ve always gotten my presses from IKEA because they’re cheap yet effective. Far from fancy. I would never consider heating up cold brew personally.

It depends what you are painting! If you’re looking at smaller models/tabletop minis, you should take a look at setups used in the minipainting communities. Larger models might benefit from different setups. I know I didn’t want to start cheap and have to upgrade later, so I jumped straight for the Iwata HP CS. The dual action is super nice to have (not a must have though). I’d also recommend spending more on a better compressor before a brush (I got a simple 1gal compressor from California Air Tools).

They have a few plans, but the cheapest is $5/mo. If you go past the allotted searches it’s pay per search after that (at a very tiny cost).

I switched to DDG when Google started adding cards at the bottom of the first page and made search results utterly useless for me. DDG wasn’t bad but it still felt like something was missing or some results were flooded by a specific site. Kagi went the extra step to group results from a site sorta like how Google has.

Ultimately it’s the benefits of old Google but some nice refinements and QoL improvements. Because it’s paid for, they don’t need to sell your data or shove paid for results down your throat.

I was informed about Kagi through one of the posts here and tried it out. It’s quite amazing how much better it is compared to even DDG. I didn’t mind DDG but it felt “old” but Kagi seems to prioritize user experience over everything else. It may not be free, but it’s worth the cost for me.